PTM1-206-K-NT SIGMA l 6 Channel Narrow Data Logger, temperature measuring range -200°C to 400°C, type K, negative temperature operation.
Accuracy +/- 0.3°C, resolution 0.1°C.
Total memory 3.8M data points of non-volatile memory over 6 channels.
Sampling interval 0.2s to 60 minutes on all selected channels.
Maximum ambient operating temperature 80°C.
Original calibration certificate and correction factors stored in memory for access as required.
Up to 500 hours battery life from 2 x ‘AAA’ Alkaline Standard Batteries.
Bluetooth connectivity,
USB communication cable included.
Dimensions: 200mm(L) x 70mm(W) x 20mm(H).
TS14-040-2 SIGMA l Series TS14 - 40mm High Sealed Thermal Barrier - Low temperature / heavy duty
High grade stainless steel construction with micro-porous insulation.
Heavy duty silicone rubber gasket to ensure complete protection against moisture at high temperature.
Comes complete with faceplate to suit data logger type, and individual thermocouple seals for various types of probe (dependant on application).
Measurement potential = 6 channels maximum.Accepts PTM1 Sigma Data Loggers.
Face plate : Silicone bungs for PTFE needle thermocouple.
IP Rating : IP67 sealing for full submersion.
Duration:
105 mins at 100°C,
55 mins at 150°C,
40 mins at 200°C,
30 mins at 250°C.
(Reduce duration by 50% for liquid / vapour)
Maximum operating temperature : 250°C.
Maximum operatng pressure: 1 bar
Dimensions: Height 40mm x Width 120mm x Length 338mm (including handle).Weight: 2.2 Kg
For use in the Food market to comply with HACCP criteria it is important that the temperature profiling system is as accurate as possible. A critical part to the accuracy of the temperature measurement is the accuracy of the thermocouple. All PhoenixTM hermocouples are manufactured to the highest quality standards and conform to either ANSIMC96.1 ‘special limits’ specification (type K) or IEC60584.2 Class 1 (type T) as detailed below. The hot junctions of all PhoenixTM thermocouples are made of food grade 316 stainless steel and offered with straight or tapered collars to help guarantee secure placement and positioning of the measurement tip in the food product being measured.
Complimenting the standard range of Type K and T thermocouples PhoenixTM now offers a new range of Type K thermocouples designed so that they can be offered with an optional thermocouple certificate of calibration. The needle probe is designed so that the inner thermocouple core wires are continuous from thermocouple plug right through to the measurement tip of the needle allowing thermocouple wire calibration data to apply to the probe measurement. The quad wrapped thermocouple cable design ensures that the thermocouple wires are protected from the hostile application conditions whilst retaining flexibility. An optional 7-point thermocouple certificate of calibration allows creation of Thermocouple Calibration Correction files in the PhoenixTM Thermal View Food Software which permits automatic thermocouple correction factors to be applied to the profile data. Combining with the application of logger correction factors ensures that the system is being used to give the most accurate measurement data possible.Satisfy all your HACCP requirements and other regulatory requirements, specific to system and thermocouple calibration, with the new PhoenixTM type K Food Needle Thermocouples (TC71) used in conjunction with PhoenixTM data logger and Thermal View Food Software. All Phoenix TM thermocouples are manufactured to the highest quality standards as the following
Type Standard Accuracy K ANSI MC96.1
special limits
+/-1.1°C or +/-0.4% of reading T IEC EN 60854-2
Class 1
+/-0.5°C (-40°C to 125°C)
+/-0.4% of reading (125°C to 350°C)
The insulation material and the plug terminations are color coded to conform to the IEC 60584 standard.
Short Needle 45mm
TC71-040-045-K l Short Needle Thermocouple, Diameter 1.85mm to 1.3mm / 45mm Long, Type K - 0.4m long
TC71-050-045-K l Short Needle Thermocouple, Diameter 1.85mm to 1.3mm / 45mm Long, Type K - 0.5m long
TC71-060-045-K l Short Needle Thermocouple, Diameter 1.85mm to 1.3mm / 45mm Long, Type K - 0.6m long
TC71-040-045-KT l Short Needle Thermocouple, Taper Collar, Diameter 1.85mm to 1.3mm / 45mm Long, Type K - 0.4m long
TC71-050-045-KT l Short Needle Thermocouple, Taper Collar, Diameter 1.85mm to 1.3mm / 45mm Long, Type K - 0.5m long
TC71-060-045-KT l Short Needle Thermocouple, Taper Collar, Diameter 1.85mm to 1.3mm / 45mm Long, Type K - 0.6m long
TC71-040-045-KT-X l Short Needle Thermocouple, Taper Collar, Diameter 1.85mm to 1.3mm / 45mm Long, Type K - 0.4m long
TC71-050-045-KT-X l Short Needle Thermocouple, Taper Collar, Diameter 1.85mm to 1.3mm / 45mm Long, Type K - 0.5m long
TC71-060-045-KT-X l Short Needle Thermocouple, Taper Collar, Diameter 1.85mm to 1.3mm / 45mm Long, Type K - 0.6m long
* All PhoenixTM thermocouple part number end by alphabet of 'X' will be supplied with calibration certificate for 7 point roll calibration at -50°C, -18°C, 0°C, 75°C, 100°C, 180°C and 250°C.
Medium Needle 60mm
TC71-040-060-K l Short Needle Thermocouple, Diameter 1.85mm to 1.3mm / 60mm Long, Type K - 0.4m long
TC71-050-060-K l Short Needle Thermocouple, Diameter 1.85mm to 1.3mm / 60mm Long, Type K - 0.5m long
TC71-060-060-K l Short Needle Thermocouple, Diameter 1.85mm to 1.3mm / 60mm Long, Type K - 0.6m long
TC71-040-060-KT l Short Needle Thermocouple, Taper Collar, Diameter 1.85mm to 1.3mm / 60mm Long, Type K - 0.4m long
TC71-050-060-KT l Short Needle Thermocouple, Taper Collar, Diameter 1.85mm to 1.3mm / 60mm Long, Type K - 0.5m long
TC71-060-060-KT l Short Needle Thermocouple, Taper Collar, Diameter 1.85mm to 1.3mm / 60mm Long, Type K - 0.6m long
TC71-040-060-KT-X l Short Needle Thermocouple, Taper Collar, Diameter 1.85mm to 1.3mm / 60mm Long, Type K - 0.4m long
TC71-050-060-KT-X l Short Needle Thermocouple, Taper Collar, Diameter 1.85mm to 1.3mm / 60mm Long, Type K - 0.5m long
TC71-060-060-KT-X l Short Needle Thermocouple, Taper Collar, Diameter 1.85mm to 1.3mm / 60mm Long, Type K - 0.6m long
* All PhoenixTM thermocouple part number end by alphabet of 'X' will be supplied with calibration certificate for 7 point roll calibration at -50°C, -18°C, 0°C, 75°C, 100°C, 180°C and 250°C.
Long Needle 100mm
TC71-040-100-K l Short Needle Thermocouple, Diameter 1.85mm to 1.3mm / 100mm Long, Type K - 0.4m long
TC71-050-100-K l Short Needle Thermocouple, Diameter 1.85mm to 1.3mm / 100mm Long, Type K - 0.5m long
TC71-060-100-K l Short Needle Thermocouple, Diameter 1.85mm to 1.3mm / 100mm Long, Type K - 0.6m long
TC71-040-100-KT l Short Needle Thermocouple, Taper Collar, Diameter 1.85mm to 1.3mm / 100mm Long, Type K - 0.4m long
TC71-050-100-KT l Short Needle Thermocouple, Taper Collar, Diameter 1.85mm to 1.3mm / 100mm Long, Type K - 0.5m long
TC71-060-100-KT l Short Needle Thermocouple, Taper Collar, Diameter 1.85mm to 1.3mm / 100mm Long, Type K - 0.6m long
TC71-040-100-KT-X l Short Needle Thermocouple, Taper Collar, Diameter 1.85mm to 1.3mm / 100mm Long, Type K - 0.4m long
TC71-050-100-KT-X l Short Needle Thermocouple, Taper Collar, Diameter 1.85mm to 1.3mm / 100mm Long, Type K - 0.5m long
TC71-060-100-KT-X l Short Needle Thermocouple, Taper Collar, Diameter 1.85mm to 1.3mm / 100mm Long, Type K - 0.6m long
* All PhoenixTM thermocouple part number end by alphabet of 'X' will be supplied with calibration certificate for 7 point roll calibration at -50°C, -18°C, 0°C, 75°C, 100°C, 180°C and 250°C.
Mineral Insulated Thermocouple
TC22-015-K l Mineral Insulated Thermocouple, Ultra-High Temperaturealloy (UHT Alloy) Type K 1.6mm, Max Temperature 1200°C - 0.15m long
TC22-020-K l Mineral Insulated Thermocouple, Ultra-High Temperaturealloy (UHT Alloy) Type K 1.6mm, Max Temperature 1200°C - 0.20m long
TC22-030-K l Mineral Insulated Thermocouple, Ultra-High Temperaturealloy (UHT Alloy) Type K 1.6mm, Max Temperature 1200°C - 0.30m long
TC22-040-K l Mineral Insulated Thermocouple, Ultra-High Temperaturealloy (UHT Alloy) Type K 1.6mm, Max Temperature 1200°C - 0.40m long
TC22-050-K l Mineral Insulated Thermocouple, Ultra-High Temperaturealloy (UHT Alloy) Type K 1.6mm, Max Temperature 1200°C - 0.50m long
TC22-060-K l Mineral Insulated Thermocouple, Ultra-High Temperaturealloy (UHT Alloy) Type K 1.6mm, Max Temperature 1200°C - 0.60m long
SW05 l Thermal view software
PhoenixTM 'Thermal View' is a powerful software package allowing you to quickly and easily analyze data from your process. Screen layout is clear and using the enhanced control bar makes this a very easy, package to operate, with all the analysis functions you will need.
Above all two key elements have been fundamental in the design of this software:- Simplicity. Too many software packages have functions built in that benefit only a few users and complicate the package for the majority. We have avoided this without compromising the available analysis in Thermal View
- Clarity. The software screen has been laid out so users can see what is really important to them - the profile of their oven, furnace, or kiln. The user interface is clearly laid out at the side of the screen to give maximum space to the profile and calculation area.
When data is downloaded from the Data Logger, the results are saved in a database for easy access which can be organized in a logical manner using the multi column sorting facility. Process templates can then be constructed so the data can be overlaid against a backdrop which represents all physical points within your oven / furnace.
The analysis functions allow you to examine and assess all your critical process parameters in a fast uncomplicated way. For example, it is possible for the user to click and drag 'inspection areas' to any point within the profile so calculations like 'time at temperature' and maximum and minimum temperatures' can be made within specific areas rather than across the whole process.
Please access www.ppsystems.co.th/ptm-software-training for more information about PhoenixTM software.
Brochure FOS-14 System : Download Here
Data Sheet NT-Data Logger : Download Here
Data Sheet Food Thermal Barrier : Download Here
Data Sheet Needle Thermocouple : Download Here
Drawing Needle Thermocouple : Download Here
Data Sheet Thermal View Software : Download Here
Data Sheet Thermal View Food Software : Download Here
Application Story Bread Baking : Download Here
Application Story Seafood Cooking : Download Here
Technical Literature F0-Pu Explain [TH] : Download Here
Service Customized Food Tray & Jig Design : Download Here
Service Thermal Barrier Inspection & Repair : Download Here
Online Training FOS-04 (TH) : Download Here
Online Training FOS-04-TX (TH) : Download Here
Blink Code PTM1200 Series (firmware ver. before 19.2) : Download Here
Blink Code PTM1200 Series (firmware ver. after 19.2) : Download Here
FOS-14 Introduction (TH) : Click Here
FOS-14 Presentation (TH) : Click Here
FOS-14 Food Profiling Innovation Webinar (TH) : Click Here
FOS-14-060-2 High Temp Food System (TH) : Click Here
Food Tray Overview (EN) : Click Here
Food Tray Overview (TH) : Click Here
Food Fryer Tray Introduction (TH) : Click Here
Food Oven Tray Introduction (TH) : Click Here
Food Special Cook Eggs Jig Introduction (TH) : Click Here
Food Special 2.5m Jig Introduction (TH) : Click Here
Food Special 2.5m Jig Installation (TH) : Click Here
Needle Thermocouple Installation (TH) : Click Here
Video Instruction FOS-04 Reset & Download via PC (TH) : Click Here
Video Instruction FOS-04 Reset & Download via Mobile (TH) : Click Here
Video Instruction FOS-04-TX RF Telemetry (TH) : Click Here
Calibration Service Local (TH) : Click Here
Calibration Service Inter (TH) : Click Here
Service Thermal Barrier Inspection & Repair (TH) : Click Here
top of page
bottom of page