PTM1-210-K-HT l 10 Channel Data Logger, temperature measuring range -100°C to +1370°C, type K, High temperature operation.
Accuracy +/- 0.3°C, resolution 0.1°C.
Total memory 3.8M data points of non-volatile memory over 10 channels.
Sampling interval 0.2s to 60 minutes on all selected channels.
Maximum ambient operating temperature 110°C.
Original calibration certificate and correction factors stored in memory for access as required.
Up to 1000 hours battery life from 2 x ‘AA’ High Temperature Lithium Batteries.
Bluetooth connectivity, USB communication cable included.
Optional upgrade to two way real time telemetry (PTM telemetry system required).
Dimensions: 200mm(L) x 98mm(W) x 20mm(H).
TS06-215-1 l Series TS06 - 215mm High Thermal Barrier - For Solution Treatment and Age Hardening. 10 Ch. Version
High grade stainless steel construction with ‘Easy fit' blanket insulation frame.
Tank supports to prevent base insulation layer crushing.
Watertight logger cavity with large seal.
Stainless steel compression fittings for thermocouples.
Measurement potential = 10 channels.
Accepts PTM1-HT Data Logger.
Duration:
13 hours at 500°C,
11.0 hours at 550°C
9.0 hours at 600°C
Dimensions: Height 215mm x Width 472mm x Length 640mm.
Weight: 25.5 Kg (empty), 38.5 Kg (full),
Water Capacity 13.0 Litre
All Phoenix TM thermocouples are manufactured to the highest quality standards and conform to the ANSI MC96.1 special limits specification with accuracy +/-1.1°C or +/-0.4%. The insulation material and the plug terminations are color coded to conform to the IEC 60584 standard.
For temperatures up to 1000 °C and diameters of 1 mm or 0.5 mm the thermocouple sheath is a high temperature nickel-chromium-iron alloy (HT Alloy - Inconel®) providing resistance to corrosion and heat along with high strength and good workability. These thermocouples have an insulated hot junction (HJ) to ensure maximum protection against electrical interference from heating elements within the furnace. The thermocouple can be supplied in different MI diameters (0.5 to 3.0 mm – standard 1.6 mm) to suit the application needs, handling requirements and response characteristics.
For temperatures above 1000 °C the thermocouple sheath recommended is an Ultra-High Temperature alloy (UHT Alloy). The alloy is a nickel-chromium with 1.4% silicon which provides inert high oxidation resistance and strength at temperatures up to 1250 °C. Thermocouples with 1.6 mm and 2.0 mm diameter wire are available with the option to include AMS2750E and CQI-9 compliant calibration certificate.
Thermocouple design options allow either standard termination in the thermocouple plug or with a PTFE tail which is helpful when managing installation of high numbers of thermocouples in thermal barriers such as the TS06 & TS07 (Aluminium Solution and Steel Reheat Applications).TC22-100-K l Mineral Insulated Thermocouple, Ultra-High Temperaturealloy (UHT Alloy) Type K 1.6mm, Max Temperature 1200°C - 1.0m long
TC22-200-K l Mineral Insulated Thermocouple, Ultra-High Temperaturealloy (UHT Alloy) Type K 1.6mm, Max Temperature 1200°C - 2.0m long
TC22-300-K l Mineral Insulated Thermocouple, Ultra-High Temperaturealloy (UHT Alloy) Type K 1.6mm, Max Temperature 1200°C - 3.0m long
SW15 l Thermal view plus software
PhoenixTM 'Thermal View Plus' is a powerful software package allowing you to quickly and easily analyze data from your process. Screen layout is clear and using the enhanced control bar makes this a very easy, package to operate, with all the analysis functions you will need.
Above all two key elements have been fundamental in the design of this software:- Simplicity. Too many software packages have functions built in that benefit only a few users and complicate the package for the majority. We have avoided this without compromising the available analysis in Thermal View
- Clarity. The software screen has been laid out so users can see what is really important to them - the profile of their oven, furnace, or kiln. The user interface is clearly laid out at the side of the screen to give maximum space to the profile and calculation area.
When data is downloaded from the Data Logger, the results are saved in a database for easy access which can be organized in a logical manner using the multi column sorting facility. Process templates can then be constructed so the data can be overlaid against a backdrop which represents all physical points within your oven / furnace.
The analysis functions allow you to examine and assess all your critical process parameters in a fast uncomplicated way. For example, it is possible for the user to click and drag 'inspection areas' to any point within the profile so calculations like 'time at temperature' and maximum and minimum temperatures' can be made within specific areas rather than across the whole process.
Please access www.ppsystems.co.th/ptm-software-training for more information about PhoenixTM software.
TXR-S-TX l RF Telemetry system comprises Co-ordinator, Router, Antenna HT and Data Logger transmitter module
Two Way RF telemetry real time transmission (must be purchased with new system). System comprises: 1 x TXR-PTM-TX Transmitter module factory fitted to data logger, frequency 2.4 GHz. Transmission speed 250Kbits/sec.
Transmission range 160m in free space.
1 x TXR-1001-TX Coordinator to receive signal from the logger or router(s) in the ‘mesh’. Uses LwMesh networking Protocol. AC01-002 communications cable supplied
1 x TXR-1000-TX Router to receive / retransmit signal from the logger to the Coordinator, or to other Routers in the ‘mesh’. Wall mounting bracket supplied
1 x High temperature antenna to transmit signal from data logger (either AC30-001 or AC30-007 depending upon application)
Note : RF telemetry requires Thermal View Plus software version 3.0 onwards.
Brochure HTS-06 System : Download Here
HTS Product Overview : Download Here
Application Story Aluminium Heat Treatment (T6) : Download Here
Webminar Aluminium Heat Treatment (T6) : Download Here
Publication Temperature Profiling Systems Support Aluminium Industry Growth (TH) : Download Here
Publication Temperature Profiling Systems Support Aluminium Industry Growth (EN) : Download Here
Data Sheet HT-Data Logger : Download Here
Data Sheet Fibre Glass Thermocouple : Download Here
Data Sheet Mineral Insulate Thermocouple : Download Here
Data Sheet Thermal View Plus Software : Download Here
Data Sheet Thermal View Survey Software : Download Here
Online Training HTS-06 (TH) : Download Here
Online Training HTS-06-TX (TH) : Download Here
Blink Code PTM1200 Series (firmware ver. before 19.2) : Download Here
Blink Code PTM1200 Series (firmware ver. after 19.2) : Download Here
Webminar WBS-PTM-200130 (TH) : Click Here
HTS-06-215-10 (TH) : Click Here
HTS01 vs HTS06 (TH) : Click Here
Video Application
Rotary Heart Furnace Survey (EN) : Click Here
Batch Furnace Survey (EN) : Click Here
Reheat Furnace Survey (EN) : Click Here
Annealing Furnace Survey (EN) : Click Here
Integrated Quench Furnace Survey - Bypass (EN) : Click Here
Integrated Quench Furnace Survey (EN) : Click Here
Integrated Quench Furnace Survey (JP) : Click Here
Video Training
TR-200129-1 TUS Software Introduction (TH) : Click Here
TR-200129-2 Reset Data Logger via RF Telemetry (TH) : Click Here
TR-200129-3 Thermocouple Inspection (TH) : Click Here
TR-200129-4 TUS CQI-9 Frame Setup (TH) : Click Here
TR-200129-5 TUS Surveying & Analysis (TH) : Click Here
Video Instruction
PTM1200 Reset & Download via Mobile (TH) : Click Here
PTM1200-TX RF Telemetry (TH) : Click Here
Calibration Service Local (TH) : Click Here
Calibration Service Inter (TH) : Click Here
top of page
bottom of page